The machine for welding meshes-L1200 Extended equipment under the cell from 50mm Mechanism cell fixation
The machine for welding meshes-L1200 Extended equipment under the cell from 50mm Mechanism cell fixation The machine for welding meshes-L1200 Extended equipment under the cell from 50mm Mechanism cell fixation The machine for welding meshes-L1200 Extended equipment under the cell from 50mm Mechanism cell fixation The machine for welding meshes-L1200 Extended equipment under the cell from 50mm Mechanism cell fixation The machine for welding meshes-L1200 Extended equipment under the cell from 50mm Mechanism cell fixation

The machine for welding meshes-L1200 Extended equipment under the cell from 50mm Mechanism cell fixation

Модель: СМКСП4-1200
Наличие: В наличии

Цена:
Без НДС:
Количество: В сравнения

 

The machine for welding meshes-1200

Extended equipment under the cell from 50mm Mechanism cell fixation

 

  

    

Stationary machine is designed for spot welding wire (grades Oak and BP) of low-carbon steel with a diameter of 2 to 5 (6) mm.

 

  The welding machine is equipped with a digital welding control system, in buildings on the programmable controller that provides automatic stabilization of the set parameters with actual values ​​indication.

 

  We offer a commercially available multi-point welding machine is provided on the production of standard mesh width of 1 m, and equipment to customer's specifications - machines for the production of grids is not standard size width of 0.5 m, 1.2 m, 1.5 m, 2 m, 2,5

 

Specifications

 

• Minimum diameter welded fittings - 2 mm

• The maximum diameter of the welding fixtures - 5 (6) mm *

• Maximum width of welded mesh - 1200 mm

• The maximum length of welded mesh - is limited to the length of the longitudinal work piece (a complete table is designed for 2 meters)

• Step transverse (stepless adjustment) - 50 mm **

• Step longitudinal (stepless adjustment) - 50 mm ** - 150 mm (180/200 mm - For the millet)

• The mechanism of cell fixation - on request

• Three-phase mains supply - 380 V, 50 Hz

• Maximum power consumption - 70-150 kW

• Current - 40-140 A (depending on the welded wire diameter and count of electrodes used)

• Welding time - 0,175-0,6 seconds

• Type of drive - pneumatic

• Download cross rod - manually

• Download the longitudinal rod - manually

• Control type broaches pusher - automatically

• Type of control forging and welding - automatically

• On welding type - simultaneously in series or cascade

• Operating air pressure - 3-7 Atm

• Cooling - forced liquid

• Attendants: 1 operator

• Performance: at least 600 square meters. meters per shift (depending on the size of the map)

 

 The machine is equipped with:

• Welding transformers TVK-75  - 2 pcs

• Electrodes (sets), pcs. - 19 (19 pcs 19 pcs lower and upper)

• Electronic control unit with the programmer 1pc

 

* - The welding wire diameter - 5 (6) mm maximum number of used electro-rows, pcs. - 10/12, Box 100x100

** - Welding wire diameter of 4 mm (inclusive)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Видео работы станка на сайте  https://www.youtube.com/watch?v=cuabZu4Ae8A

http://termex-ukraine.com.ua/

 

 

Написать отзыв

Ваше Имя:


Ваш отзыв: Внимание: HTML не поддерживается! Используйте обычный текст.

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: